The Complete Guide to Fixing a Smartwatch That Won t Connect to Bluetooth width

How To Use Da Fit Watch And Troubleshooting (Complete Manual)

This guide applies to Da Fit Watch and describes in detail how to use Da Fit Watch.

Da Fit Watch Notes

For Apple phone users: If it is in standby or hibernation state for a long time (for example, 2 hours or more) on Apple phone, (the phone has not been using, and it is in a black screen state), Da Fit will be cleaned up by IOS system, then the APP application and watch disconnect in between, the functions on APP are not available to use. Please re-open the watch and it will be automatically reconnected.

For Android phone users: After installing the APP software on the Android phone, you need to enable the background application launch permission in the settings of your phone.

Each smart phone has a difference. Take Huawei phone as an example. The steps are as follows:SettingsApplicationApplication Launch ManagementDa Fit, find the APP application, change the automatic management to manual management, open all permissions (allow self-start, allow association start, allow background activities). This is only for the APP application to maintain the Bluetooth connection with the watch while the phone is in standby (the phone does not have a bright screen), and will not be cleaned up by the Android system. Will not use network traffic in the background, nor does it affect the power consumption of the phone.

How to connect da fit watch to phone

1. Open the Da Fit app and set your personal information, such as Height, Weight, Birth Year, etc..
2. For Android mobile phone: Switch to the home page after information setting on Android phone, click ADD Device to reach the Add Device page, click to choose the right model icon you purchased.
3. Its automatically back to the home page after successful connection between app and watch. Click the device icon to switch to the device page to check connection status, it will be shown the device model and picture, power, address and other informations after connected successfully.

1. For iPhone: Bluetooth connection of IOS phone refers to Android phone (same with point 2, 3)
2. When pairing is failed by scanning QR code, you can click to see if the watch and phone has been connected with others,If yes, please ignore the device on phone before new connection.

Da Fit APP Settings

WATCH FACES

Click the WATCH FACES to select a dial you prefer and click on the top left corner to return to save it.

NOTIFICATIONS

Click to open the notification reminder, you can select the program you want to push, you can choose the social application you want or select push all information.

ALARMS

Click the ALARMS to enter into the setting page. Three alarms period for default.

Click on an alarm to enter the clock time.

SHUTTER

Android phone: Click the shutter function from APP,and the watch will show a

camera icon, click it to take a photo directly, photos will be automatically saved to your album.

Apple Phone: Click the Shutterfrom the iphone and your phone needs to open the camera manually(due to the IOS system) then click to take pictures on watch.

OTHERS

Find Device: ClickFind Device, it will vibrates to remind on watch.

Time Formats: Click to set the 12-hour Time or the 24-hour Time. Its done after click, The watch time is synchronized with your setting time format.

Do not disturb: Closedis the default mode. Click to enter the setting page, you can set the do not disturb mode according to your personal needs. Information will not be accepted again after setting.

Reminders to Move: Default mode is off. Sedentary reminder only takes effect from 10:00- 22:00.

Lift wrist to brighten screen: Default mode ON. An effective duration can be set. you can set one duration according to individual required duration.

Weather: switch to open and close weather function, and you can manually set up the city or automatic positioning. The positioning needs to give authority, otherwise it is not available to use. Weather information update once every 2 hours, if it is in closed state, it takes to wait for 2 hours before disappearing on watch

UPGRADE

When a new version of the server is detected, a new version of the watch firmware can be upgraded

Unbind

Pairing of your watch with phone app can be unbinded.

Note: For Apple phone IOS, go to Settings Bluetooth, to ignore current Bluetooth pairing, in order to completely unbinding

Da Fit Watch Settings

Basics

Power ON: When watch is power off, long press the side button for 5 seconds to power on. In the standby state, short press the side button to wake up it .

Power OFF: When watch is power on, long press the side button for 5 seconds to power off directly.

Message: Long press the touch key to enter the Message interface. You can see the Bluetooth name, device type, device address, etc.

Pulling down status menu: Pull down from the dial to enter the status menu, it displays the do not disturb mode, Brightness, Find Device, Screen Lock, settings, connection icons, power display and other functions.

Steps

You can view pedometer data on Da Fit watch and APP. When watch is successfully paired with APP, your sport data will automatically synchronize (or manually refresh) from watch to the APP, including steps count, distance, calories and other parameters.

Sleep monitor

The default sleep monitor time for the Da Fit watch is from 20:00 pm to 10:00am. If you wear a watch to sleep, you can check last nights sleep time on the watch after getting up the next morning. When watch is successfully paired with APP, the sleep data will be automatically synchronized (or manually synchronized) to the APP.

The Da Fit watch will automatically recognize and judge what the sleep state it comes to be . If you just get up shortly from bed, the sleep data displayed on the watch is different from the actual data because the watch is still detecting sleep. It is only when the watch completes detection that will show results of the whole night, and is consistent with the actual data. It will be acceptable to have some errors with the actual data due to different sleep states.

Heart rate monitor

When heart rate data is empty, it displays 000Bpm. Go to the heart rate icon, long press the touch key for more than 2s to start testing. The data displays directly after testing. It is continuously measured for 30 seconds and it just keeps the last data. if it exits from the current page during measuring, the testing value is not recorded.

Training

Exercise includes Walking, running, cycling, skipping, badminton, basketball, football.

Tap the appropriate exercise icon: Long press to enter the corresponding exercise mode, data such as steps, distance, calories, heart rate, exercise duration will be visible.Long press on the current sport page to pause and exit the application.

Activity data can only be uploaded to the APP for viewing. During the post-exercise data cannot be viewed on the watch.

Note: Rules for storing sports data:

1. Exercise time more than 2 min or;
2. with test heart rate data; It must meet one of the two conditions that can store data, if not, it will not store any exercise data.

Blood Pressure

Go to the blood pressure icon and long press the touch key to measurement. You can stop it after the measured value is obtained.

Blood Oxygen

Go to the blood oxygen icon and long press the touch key to measurement. You can stop it after the measured value is obtained.

Weather

After the weather function is enabled on Da Fit APP, it will be displayed on the Da Fit watch. It wont display if its started on APP. The weather information will be updated once every 2 hours.

Message

Go to Message icon, and long press to check the message you wont miss. You first need to give allowance to synchronization function on Da Fit APP. The information received from the phone will be synchronized to the Da Fit watch.(5 messages will be kept by default. If it comes over 5 messages, it will automatically cover the earliest message. Long press the current message to clear automatically after view.)

Messages can be synchronized from smart phone to the watch via Bluetooth. They can be easily viewed. It does not support to reply. For Voice message, it can only display incoming messages, but can not be heard on the watch

How to take photos with Da Fit Watch?

You can take a photo with your phone camera by remotely control.For Android phone users: Click the Shutter, your Android phone will enter the current camera page , the camera icon will pop up on the watch, and then you can click to take photos.

For Apple Phone: Click the Shutter, an introduction page comes to your Apple phone, your phone needs to manually enter the camera interface, and then click to take pictures on watch. You need to manually open the camera because of the Apple phone system.

How do I set the time on my Da Fit watch?

Open the Da Fit APP, turn on the Bluetooth well and the time will be automatically synchronised when the watch is connected.

How to check the content of Da Fit watch message notifications?

Press and hold on the watch in the push message screen to access it, then click on the small dot to view the content of the messages received by the watch.

How can I check the battery level of Da Fit watch?

You can check the battery level in the device screen of Da Fit APP, and you can also check the battery level by long press in the watch time screen.

How to use the music control function?

When the Da Fit watch is successfully connected to the App, open the music player of your mobile phone, play the downloaded music list and long press to switch in the music interface of the watch. (Some mobile phones do not support music players)

How can I monitor my sleep with Da Fit watch?

When a person is sleeping, they are generally at rest and when they roll over and move their arms, the sensors in the bracelet will register changes in activity.

The watch is worn on the wrist and it constantly tracks changes due to body movement and determines whether the person is sleeping or not. In order to monitor sleep accurately and effectively, we have set unique monitoring conditions so that only watch data that actually meets the conditions will be recorded as valid sleep data.

Troubleshooting

In case theres a problem during the using of the Da Fit smart Watch, please solve it accordingly by the following ways. If the problem still exists, please contact the seller or designated maintenance personnel.

The Da Fit watch cannot be turned on?

1. Press the display touch area for over 3 seconds
2. Make sure there is enough battery. Battery power may be too low, please charge it.
3. If leave the watch too long and the normal charger does not respond, please try charging with an output power of 5V/1A.

Why the Da Fit watch switches off automatically

Battery power may be too low, please charge it.

Why the Da Fit watch Short battery life?

1. It may occur when the battery hasnt been fully charged, please ensure sufficient time for the charging ( at least 2 hours is required)
2. Charger or data cable may not work properly, please change a new one.
3. Please check the port of the data cable and try again to ensure a proper connection

Bluetooth disconnect or unable to connect

1. Please restart it
2. Please turn off Bluetooth of mobile phone and open it to reconnect.

Why the Da Fit watch has inaccurate sleep data?

Sleep monitor is designed to Imitate the natural pattern of falling asleep and waking up, please wear the Da Fit watch normally, otherwise deviation may occur if going to bed late or only wear while sleeping. There may not sleeping data generate if go to bed at day time as the defaulted sleeping time is preset to between 9:00 pm to 9:00 am.

FAQ

How long does it take to charge the Da Fit watch to a full charge?

One unit can be fully charged in 1 hour, it is recommended to charge it for more than 2 hours to get the maximum performance out of the battery.

How to switch Da Fit watch off

First light up the watch, switch to the time page, release your hand and then long press the button, this will show the hardware information of the watch, then release your hand and long press again, it will quantify the off button, release your hand and long press again until the watch is switched off. Plug in the charge to turn on the phone oh.

How do I unbind my Da Fit watch?

Android phone operation: open the app, then click the third icon below, click unbind.Mobile phone operation:1. Open the App, then click the third icon below, click Unbind.2. Find our watch in the Bluetooth settings of your phone, click on the small exclamation mark behind it, and then select Ignore this device.3. If you find that the device is still in the list after ignoring it, you can turn it off and on again. Turn on Bluetooth again

Cant connect my Da Fit watch?

Turn on your Bluetooth, open the app, click on unbind and rebind.

Is the Da Fit watch waterproof?

The watch is not resistant to water vapor, warm water or hot water, it is resistant to household splashes. (It is not recommended to wearwatch for swimming, it may be affected by water pressure)

Why does the Da Fit watch not show the weather?

When you want to check the weather in real time, open the app and the watch will connect successfully to get the weather data.

Why is there no data in the weekly activity report and weekly sleep report?

It is important to distinguish between daily pedometer data and sleep data and weekly pedometer data and sleep data, which can be viewed on different pages of the APP. The daily pedometer data can be viewed on the home page of the app, and the daily sleep data can be viewed by swiping to the left on the pedometer page. Updated every Monday at 7:00Weekly pedometer and sleep data and analysis data (available on the Discover page).

Why doesnt Da Fit watch count my steps anymore?

When the watch is asleep, the watch does not count steps. For example, when you wake up in the morning, the watch needs to be in the waking state before it starts counting steps.

Watch: Plug the watch into the USB port, press the watch dot once and release it, walk with the watch on for a few dozen steps and see if the watch counts. There is an automatic learning process that adapts to different peoples behaviours.

Why is there no sleep data when I sleep with my Da Fit watch on?

1. The body is too active during sleep, the quality of sleep is poor and the watch recognises it as not sleep state.2. Sleep is only recorded if the sleep time is between 8pm and 10am.

Why does the Da Fit watch not light up when I flip my wrist?

First open the App and make sure the wrist flip light switch is not turned off. If it is turned on and still 1 does not work, please remove both sides of the watch band and place it flat on the desktop, open the App, click on Other Settings and click on Calibrate. Also, if you are asleep, the wrist flip screen is not available.

Why does the Da Fit watch often disconnect?

Hello, this situation may be caused by the phone system blocking or cleaning the software, please set your phone according to different phone brands.